{"id":3624,"date":"2024-11-19T17:32:01","date_gmt":"2024-11-19T17:32:01","guid":{"rendered":"https:\/\/m0aws.co.uk\/?p=3624"},"modified":"2024-11-29T09:38:34","modified_gmt":"2024-11-29T09:38:34","slug":"another-new-radio","status":"publish","type":"post","link":"https:\/\/m0aws.co.uk\/?p=3624","title":{"rendered":"Another new radio!"},"content":{"rendered":"\n

Many years ago when I lived in France I had a Flex-3000 transceiver<\/a>, one of the first fully SDR transceivers on the market. It was paired with a proprietary Windows XP application called PowerSDR (now Opensource and called Thetis<\/a>) and connected via a firewire connection.<\/p>\n\n\n\n

17 years later I am once again venturing into the world of SDR transceivers in the form of a Hermes Lite 2. (HL2)<\/p>\n\n\n\n

The HL2 hardware is available via the Makerfabs<\/a> website in kit form. I ordered the HL2 motherboard, the N2ADR Filter Board<\/a> to ensure a clean signal from the transceiver and the enclosure<\/a>. Total cost for all the parts and shipping was \u00a3288.00 including all taxes.<\/p>\n\n\n\n

The kit took about 10 or so days to arrive and was very easy to put together making sure to fit the PA transistor heat sink the right way round so that it doesn’t short out the main board. (There are many videos about this on YouTube<\/a>)<\/p>\n\n\n\n

Once the hardware was put together I needed to install some software to control\/drive the HL2. Being a heavy weight Linux user my software choice had to come from the Opensource world.<\/p>\n\n\n\n

\"M0AWS
M0AWS Hermes Lite 2 SDR Trasnceiver and Xiegu XPA125B Amplifier<\/figcaption><\/figure>\n\n\n\n

After much research and chatting with other HAMs on the Matrix<\/a> who have the HL2 I found that most people use the closed source SDR Console software to control the transceiver. Since this software is for Windows it’s not something I can use as I don’t have any Windows PCs, they’re all Linux only.<\/p>\n\n\n\n

To this end I started researching Linux SDR software for the HL2 and decided that PiHPSDR<\/a> was the one I was going to try first.<\/p>\n\n\n\n

PiHPSDR was originally written for the RaspberryPi 3\/4\/5 single board computers (SBCs) but, I wanted to have a go at compiling it on my Kubunu Linux<\/a> desktop PC. I found it straight forward to follow the instructions in the pihpsdr-install.pdf<\/a> file and in no time at all I had the software compiled and running.<\/p>\n\n\n\n

\"PiHPSDT
PiHPSDR running on Kubuntu Linux 22.04LTS<\/figcaption><\/figure>\n\n\n\n

PiHPSDR is infinitely configurable and thus it feels like it has an infinite number of menus and options. Since the HL2 has two separate receivers, it’s possible to listen to two bands at the same time. This is the one feature I really missed more than anything with my FTDX10 so, I’m glad to have dual receive capability back once more!<\/p>\n\n\n\n

Going through all the settings I realised that the A and B VFOs have individual settings. Initially I setup the software using just VFO A but, when I switched over to VFO B none of my settings were there. I then had the realisation that the settings apply only to the active VFO. I quickly went through all the settings again for VFO B and all was well.<\/p>\n\n\n\n

In no time at all I was on the air with just 5w as my Xiegu amp hadn’t arrived. Not being perturbed I tuned up on the 15m band and started searching for stations. Interestingly it was CQWW SSB weekend and the band was full of contest stations. Working my way along the spectrum I found I was able to work quite a few stations with ease using my vertical and inverted-L antennas. <\/p>\n\n\n\n

Contacts of note were VE3KG at 3406 Miles, VE3JM at 3382 Miles, RW9DX at 2380 Miles, KC1XX at 3331 Miles and N1DE at 3600 Miles. I also worked a bunch of European stations and had a great time giving away points with my little QRP rig.<\/p>\n\n\n\n

Contests are a good time to try out new radios as all the big stations with good ears are on the bands and make the effort to get us QRP guys in their logs.<\/p>\n\n\n\n

I have been extremely impressed with the receivers in the HL2 radio. It handles both strong and weak stations exceptionally well. PiHPSDR really does have brick-wall filtering and I was able to work the weaker stations right next to large contest stations with ease. At no time did the front-end of the receiver get overloaded.<\/p>\n\n\n\n

Below is a short video clip of a conversation on the 80m band. The band was quite noisy however, with a reduction of the AGC gain and the 2700Hz filter it’s possible to remove almost all the noise.<\/p>\n\n\n\n

Hermes Lite 2 SSB reception on the 80m Band<\/figcaption><\/figure>\n\n\n\n

On CW the radio is a real delight. With the filtering and AGC gain control I am able to use extremely narrow receive filters without any ringing whatsoever. I would say that on CW the HL2 is as good as my FTDX10 when it comes to receiving even the weakest of stations.<\/p>\n\n\n\n

I’m sure on paper the FTDX10 receiver has better numbers however, to the ear there really is no discernible difference.<\/p>\n\n\n\n

Below is a short video clip of D4DX on CW on the 80m band. The band was noisy but, with the 100Hz filter enabled and clever use of the AGC Gain I was able to remove almost all the noise completely, reducing fatigue on the ears and making reception very easy even though there was some fairly deep QSB at times.<\/p>\n\n\n\n

Receiving D4DX on CW on the 80m band using 100Hz filter and reduced AGC gain<\/figcaption><\/figure>\n\n\n\n

A few days later my Xiegu XPA125B amplifier arrived. Unfortunately the amp didn’t come with the normal PTT lead that comes from the factory and is detailed in the user manual. For some bizarre reason this is a chargeable option when you buy the amp from Martin Lynch and Sons even though it is included from the factory.<\/p>\n\n\n\n

This meant I had to make a lead which was a problem as I didn’t have one of the mini DIN plugs required for the connection to the amplifier. Jumping onto Amazon I ordered a packet of two and sat back and waited for their arrival.<\/p>\n\n\n\n

A couple of days later the DIN plugs arrived and I quickly made up the necessary phono\/RCA to mini DIN lead and got the amp operational.<\/p>\n\n\n\n

The Xiegu XPA125B isn’t cheap but, it’s a really nice bit of kit. The neat little LCD display keeps you informed of power O\/P, I\/P and O\/P SWR, voltage, current draw, temperature and band selected.<\/p>\n\n\n\n

With just 0.7w of input from the HL2 I’m able to get a full 100w O\/P from the amp. On the lower bands I have to reduce the O\/P from the Hermes Lite 2 even further so that I don’t over drive the amp.<\/p>\n\n\n\n

Being an avid Short Wave Listener (SWL) I wanted to see how the HL2 performed when listening to the big AM broadcast stations. To my surprise it makes an excellent SWL receiver with better AM demodulation than many of the more expensive radios. Having the option to select receive filters up to 16Khz wide I found I was able to get the best audio possible from many of the broadcast stations including Radio Caroline on 648Khz. It’s quite an improvement over the 12Khz maximum on the FTDX10.<\/p>\n\n\n\n

Listening to AM Broadcast stations<\/figcaption><\/figure>\n\n\n\n

What makes this project even more exciting is that both the hardware and software are from the OpenHardware\/OpenSource world. The complete circuit diagram, PCB layout and information is available for all to download, something you don’t often see these days!<\/p>\n\n\n\n

PiHPSDR is one of the nicest SDR applications I’ve seen in the Linux world and even comes with a 200 page downloadable user manual. Something you don’t see in many Opensource projects. The source code for the application is downloadable and you are able to make your own changes to it without restriction.<\/p>\n\n\n\n

Overall I am really pleased with the Hermes Lite 2 SDR transceiver.
It has two excellent receivers, is infinitely configurable via the PiHPSDR software and performs extremely well under all conditions. Since getting the radio I haven’t even switched on the FTDX10.<\/p>\n\n\n\n

More soon …<\/p>\n","protected":false},"excerpt":{"rendered":"

Many years ago when I lived in France I had a Flex-3000 transceiver, one of the first fully SDR transceivers on the market. It was paired with a proprietary Windows XP application called PowerSDR (now Opensource and called Thetis) and connected via a firewire connection. 17 years later I am once again venturing into the … <\/p>\n

Continue reading “Another new radio!”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[54,36,300,73,163,404,93,11,4,399,407,251,171,38,85,15,81,135,405,400,213,37,9,326,122,406,5,299,258,110,215,401,403,402,10],"tags":[],"class_list":["post-3624","post","type-post","status-publish","format-standard","hentry","category-audio","category-code","category-compile","category-cw","category-devices","category-din","category-filter","category-ftdx10","category-ham-radio","category-hermeslite2","category-hl2","category-inverted-l","category-kubuntu","category-linux","category-mls","category-mlands","category-morse-code","category-opensource","category-phono","category-pihpsdr","category-powersdr","category-programming","category-qrp","category-radio","category-raspberrypi","category-rca","category-sdr","category-sourcecode","category-ssb","category-station","category-ubuntu","category-xiegu","category-xieguxpa125b","category-xpa125b","category-yaesu"],"_links":{"self":[{"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/posts\/3624","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3624"}],"version-history":[{"count":34,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/posts\/3624\/revisions"}],"predecessor-version":[{"id":3668,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=\/wp\/v2\/posts\/3624\/revisions\/3668"}],"wp:attachment":[{"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3624"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3624"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/m0aws.co.uk\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3624"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}