Initially neither of the devices would work with the PiHPSDR build that my script was creating. After some investigation I found this was due to the fact that the developer build script was only building the SOAPYSDR library, it wasn’t building the modules for each device type.<\/p>\n\n\n\n
This was easily fixed by adding some extra code that would build the necessary SOAPYSDR modules so that the devices were discovered on the local LAN.<\/p>\n\n\n\n
Since I had the devices to hand I took the opportunity to test the updated build script on a number of Linux Distro’s<\/a> that I have to hand.<\/p>\n\n\n\n I tested the updated build script on Kubuntu 22.04LTS, Linuxmint 22.1 Cinnamon Edition and RaspberryPi 4\/5 running the latest RaspberryPi OS 64bit version. <\/p>\n\n\n\n These all worked great with the transceivers and will now make a great platform for QO-100 stations that use either the Adalm Pluto, Pluto+ or LibreSDR devices.<\/p>\n\n\n\n Of course this build of PiHPSDR will also work with the Hermes Lite 2 and RadioBerry devices that I use most of the time in my own radio shack.<\/p>\n\n\n\n The updated PiHPSDR install script can be downloaded from my original blog article on the subject that is located here: https:\/\/<\/a>m0aws<\/a>.co.uk\/?p=3686<\/a><\/p>\n\n\n\n The updated build script will most likely work on most Debian based Linux distro’s and build a working version of PiHPSDR. If you find a distro where you have problems please email me and let me know the details and I’ll happily look at the issue and try to resolve it.<\/p>\n\n\n\n Thanks to Steve for the loan of his precious SDR transceivers, I had a lot of fun with them!<\/p>\n\n\n\n More soon …<\/p>\n","protected":false},"excerpt":{"rendered":" Over the last few weeks I’ve been working on my install-pihpsdr script to build a version of the DL1YCF PiHPSDR fork that will work with the Adalm Pluo, Pluto+ and LibreSDR transceivers. Since I don’t own any of these devices, Steve M0XVT has loaned me his Adalm Pluto and LibreSDR devices to test with. Initially … <\/p>\n![\"PiHPSDR](\"https:\/\/m0aws.co.uk\/wp-content\/uploads\/2025\/04\/PiHPSDR-on-Linuxmint-Cinnamon-2048x1431.jpeg\")