Simple EFHW vertical on 20m works great!

I completed the fine tuning of the 20m EFHW Vertical today, I got the SWR down to 1:1 at 14.10 Mhz. This gives me a perfect match for the CW and digital section of the band with the SSB part of the band not exceeding 1.4:1 at 14.350.

I ended up removing 34.5cm of wire from the original antenna length to get the resonance where I wanted it. This was caused mainly by the extra inductance added into the circuit by the 49:1 Unun. This is to be expected and perfectly normal when feeding an antenna via an impedance matching transformer.

I bolted the 49:1 Unun directly to the earth rod, this way it’s got a solid earth connected directly to it to keep the resistance to a minimum. (The metal mounting plate is also the earth termination point).

I spent some time today chasing the DX on the 20m band using the FT8 digital mode.

The fun started with VK2LAW in Sydney Australia, followed by E25ETT in Thailand, KP4CAR in Puerto Rico, 9G5AR in Accra Ghana and The Sahrawi Amateur Radio Club station S01WS in Western Sahara. A nice mix of stations dotted around the world.

I like to keep an eye on the PSKReporter site whilst on air to see what I’m hearing. As you can see I heard stations from the West Coast USA right across to New South Wales in Australia and down south as far as Brazil. The 20m EFHW Vertical antenna and Yaesu FTDX10 radio combination really does have good ears

As for being heard, well it’s a similar story, below is a map showing all the stations that heard me as reported on the PSKReporter website.

One again, great global coverage from the antenna and transceiver combo with only 20w being used for most contacts. (25w used to break some of the pileups!)

Overall I’m really pleased with the performance of the antenna, for such a simple design it works exceedingly well. One huge advantage of a half wave over a quarter wave antenna is that the point of max current is 50% along the antenna’s length, on the 20m band EFHW Vertical this puts it some 5m above the ground lowering the angle of take off and making it a great DX antenna.

If you’ve not got a lot of space but, want to work the DX on 20m then I highly recommend you give one a try, I’m sure you’ll be amazed at how well it performs.

Can’t wait to get a 40m EFHW Inverted L up next!

Information as to why it’s best to keep the feed point at ground level for this antenna is here.

More soon …